|
| |
S = Spring / F = Fall / A = Annually / R =
as Required
|
Foundations and Basement
|
S
|
F
|
A
|
R
|
|
a. Check for signs of
termite infestation.
|
|
|
x
|
|
|
b. Check grading to
ensure that water will drain away from the foundation
|
|
|
x
|
|
|
c. Check basement for
leakage and/or dampness following wet weather.
|
|
|
|
x
|
|
Doors and Windows
|
S
|
F
|
A
|
R
|
|
a.
Check doors, windows and trim for finish failure.
|
x
|
|
|
|
|
b.
Check glazed openings for loose putty.
|
x
|
|
|
|
|
c.
Check for broken glass and damaged screens.
|
x
|
|
|
|
|
d.
Clean screens
|
x
|
|
|
|
|
e.
Check and lubricate window hardware.
|
x
|
x
|
|
|
|
f.
Check weatherstripping for fit and/or damage.
|
x
|
|
|
|
|
g.
Check caulking at door, windows and all other openings, plus joints
between dissimilar materials ( i.e. wood-masonry)
|
x
|
|
|
|
|
Exterior Walls
|
S
|
F
|
A
|
R
|
|
a. Check masonry for
cracks and loose joints
|
x
|
|
|
|
|
b. Check painted surfaces
for paint failure.
|
x
|
|
|
|
|
c. Check siding and trim
for damage or decay.
|
x
|
|
|
|
|
d. Check all trim for
tightness of fit.
|
x
|
x
|
|
|
|
Roof
|
S
|
F
|
A
|
R
|
|
a. Check for damaged or
loose shingles, blistered roofing, etc.
|
x
|
|
|
|
|
b. Check underside of
roof for water stains or dampness.
|
x
|
|
|
|
|
c. Check for damaged
flashing.
|
x
|
|
|
|
|
d. Check for damaged
gutters, downspouts, hangers and strainers
|
x
|
|
|
|
|
e. Clean gutters and
downspouts.
|
x
|
x
|
|
|
|
f. Check vents, louvers,
and chimney caps for birds nests etc...
|
x
|
x
|
|
|
|
g. Check fascias and
soffits for paint failure and decay.
|
x
|
|
|
|
|
h. Check antenna guy
wires and supports.
|
|
|
x
|
|
|
i. Check masonry
chimneys.
|
x
|
|
|
|
|
Interiors
|
S
|
F
|
A
|
R
|
|
a. Check all finished
surfaces for dirt, finish failure and required repairs.
|
x
|
|
|
|
|
b. Check all joints in
ceramic tile, laminated plastic and similar surfaces.
|
x
|
x
|
|
|
|
c. Check grouting around
tubs, showers and sinks.
|
x
|
x
|
|
|
|
Floors
|
S
|
F
|
A
|
R
|
|
a. Check for wear and
damage, particularly where one material meets another.
|
|
|
x
|
|
|
Electrical System
|
S
|
F
|
A
|
R
|
|
a. Check condition of
lamp cords, extension cords and plugs, replace at first sign of wear or
damage.
|
x
|
x
|
|
|
|
b. Check areas where
wiring is exposed. Have replaced at first sign of damage.
|
x
|
x
|
|
|
|
c. If fuses blow or
breakers trip frequently, call a qualified electrician to locate and
correct the problem.
|
|
|
|
x
|
|
d. If you feel a slight
shock or tingling from touching any appliance, disconnect it and make
repairs.
|
|
|
|
x
|
********** Electrical repairs should be performed by a qualified technician only
**********
|
Heating and Cooling System
|
S
|
F
|
A
|
R
|
|
a. Clean or change any
dirty air filters.
|
|
|
|
x
|
|
b. Clean dirt and dust
from around furnaces, condensing unit, grilles, and registers.
|
x
|
x
|
|
|
|
c. Have heating and
cooling system checked by a qualified service person.
|
x
|
x
|
|
|
|
d. Remove window air
conditioners for winter (if applicable).
|
|
x
|
|
|
|
e. Service humidifier
and/or dehumidifier
|
|
|
x
|
|
|
